Welcome, visitor! [ Register | LoginRSS Feed



Vibratory Finishing Machine Manufacturer Introduces How The Polishing Machine Should Be Used

  • Street: Shuanglin Industrial Park, Huzhou City, Zhejiang Province
  • City: Huzhou
  • State: Arizona
  • Zip Code: 313000
  • Listed: September 16, 2019 9:19 pm
  • Expires: 8 days, 23 hours
Vibratory Finishing Machine 1


Any industrial machine needs to know its usage precautions correctly when it is used. So today, the Vibratory Finishing Machine manufacturer will teach you where the polishing machine needs to pay attention during use.

First, the polishing machine should be laid flat
This is the basic operation requirement of the polishing machine. Generally, the machine can be placed on a relatively hard ground. For example, the marble floor is suitable for placing polishing equipment. It should be noted that the operating environment should be kept dry and ventilated.

Second, check before starting
Before using the polishing machine, check the equipment and circuit to make sure that the equipment is not loose, damaged or faulty. Check that the circuit is normal and the wire cannot be damaged. Otherwise, there is a risk of electric leakage.

Third, evacuate unrelated personnel
When carrying out the work of the polishing equipment, evacuate some unrelated personnel, because they are not familiar with some operational procedures of the machine, and once the machine is touched, danger may occur, so the requirement that the unrelated person is not at the machine side is required.

Fourth, the machine must be debugged before it can be used for normal work.
After doing all the preparatory work, the polishing machine should be operated at no load for half an hour before the normal processing operation can be carried out.

information about vibratory finishing machine : https://www.zhongyun-machine.com

Ad Reference ID: 755d8050595b1a1

No Tags


Report problem

Processing your request, Please wait....

0 favorites

Use this form to send a message to the ad author.

Use this form to send a message to the ad author.