- Street: Shuanglin Industrial Park, Huzhou City, Zhejiang Province
- City: Huzhou
- State: Kentucky
- Zip Code: 313000
- Listed: August 29, 2019 7:20 pm
- Expires: 14 days, 12 hours
What is a micro-mist fixed variable throttle? It is used on the vibrating screen, so what is the working principle of it? Let’s take a look at the manufacturer of the Vibratory Finishing Machine .
First, the micro-fog fixed variable throttle valve is a structure of the putty powder mixer, then its working principle is to tighten the dry mortar into the putty powder mixer and enter two ways. First, the long holes in the joint 7 and the gas are transported through the bottom of the miniaturization device.
Secondly, the micro-fog fixed variable throttle valve is used on the vibrating screen. Its working process is as follows:
The gas pipe 10 rises in the oil pipe 9 by air bubbles, and the lubricating oil is carried into the small oil cup 11, so that the initial skew of the small oil cup has a certain degree of skewness, so that sewage is accumulated in the lower pipe, the bent pipe, and the like. The sewage is then filled with oil; the second channel enters the spray sleeve 5 and assumes that the active stack in the slit formed between the nozzle 6 and the spray sleeve is brought back into the monotonous mortar by air flow to invade Pneumatic equipment. Forms various defects. A high pressure flow is formed during the movement and then the air pressure at the nozzle A is lowered. The airflow itself passes through the skewed hole in the joint 7, and the need is eliminated in time. The equipment used to eradicate sewage is called a sewage pool.
Enter the oil cup and pressurize the oil surface so that there is a pressure difference between the oil pressure and the air pressure at the nozzle A. The oil in the small 320 oil cup is dropped into the oil sight 2 through the oil pipe 9, the check valve 12, the sleeve 13 and the oil regulating needle valve 1 are subjected to a pressure difference, and are filtered and dropped into the nozzle 6, and the nozzle 6 is sprayed. The high-speed airflow around A is sprayed, and after atomization, the airflow enters the upper chamber of the oil cup. Oil particles having larger particles are deposited from the head on the oil surface, and only a fine oil mist having a small particle diameter (about 5 μm or less) is suspended on the oil surface and outputted with dry powder mortar.
information about vibratory finishing machine : https://www.zhongyun-machine.com
About the ad author
- Listed by: machineunique
- Member Since: May 5, 2019
Other items listed by machineunique
- Vibratory Finishing Machine Manufacturers Introduce How To Use Vibration Motors
- Vibratory Finishing Machine Manufacturers Introduce What Is Vibration Polishing?
- Manufacturers Of Vibratory Finishing Machine Share Manual Waxing
- Vibratory Finishing Machine Manufacturers Share Knowledge Of Machining
- Vibratory Finishing Machine Manufacturer Introduces How The Polishing Machine Should Be Used