Welcome, visitor! [ Register | LoginRSS Feed

 

$60,000,000.00

What Is The Key To The Operation Of The Aluminum Wheel Polishing Machine?

  • Street: Shuanglin Industrial Park, Huzhou City, Zhejiang Province
  • City: Huzhou
  • State: Indiana
  • Zip Code: 313000
  • Listed: May 24, 2019 1:27 am
  • Expires: 56 days, 11 hours

Description

The key to the operation of the Aluminum Wheel Polishing Machine is to try to get the maximum polishing rate in order to remove the damage layer from the polishing as quickly as possible. We can require a coarser abrasive to ensure a higher polishing rate to remove the polished damage layer, but the polishing damage layer is also deeper; it can also require the use of the finest material to make the polishing damage layer shallower, but The polishing rate is low. Let’s take a look at the Aluminum Wheel Polishing Machine.

When the Aluminum Wheel Polishing Machine is polished, the sample grinding surface and the polishing disc should be absolutely parallel and evenly pressed on the polishing disc, taking care to prevent the sample from flying out and creating a new wear scar due to too much pressure. At the same time, the sample should be rotated and moved back and forth along the radius of the turntable to avoid local wear of the polished fabric too fast. During the polishing process, the fine powder suspension should be continuously added to keep the polishing fabric at a certain humidity. Too much humidity will weaken the wear scar, so that the hard phase in the sample will appear embossed and the non-metallic inclusions in the steel and the graphite phase in the cast iron will produce a “tailing” phenomenon; if the humidity is too small, the sample will be generated due to frictional heat generation. The temperature rises, the lubrication is reduced, the surface is tarnished, and even dark spots appear, and the light alloy will throw the surface.

The key to the operation of the Aluminum Wheel Polishing Machine is to try to get the maximum polishing rate in order to remove the damage layer from the polishing as quickly as possible. At the same time, the polishing damage layer will not affect the final observed tissue, ie, it will not cause false tissue. The former requires the use of coarser abrasives to ensure a larger polishing rate to remove the polished damage layer, but the polished damage layer is also deeper; the latter requires the use of the finest material to make the polished damage layer shallower, but polished The rate is low. The best way to resolve this contradiction is to divide the polishing into two phases. The purpose of rough polishing is to remove the polished damage layer. This stage should have the maximum polishing rate. The surface damage caused by rough polishing is a secondary consideration, but it should be as small as possible. Secondly, fine polishing (or final polishing). The purpose is to remove surface damage from rough polishing and minimize polishing damage.

The quality of the polishing of the Aluminum Wheel Polishing Machine seriously affects the structure of the sample and has gradually attracted the attention of relevant people.

information about aluminum wheel polishing machine : https://www.zhongyun-machine.com/product/wheel-polishing-machine/

Ad Reference ID: 2865ce79cea846dc

No Tags

  

Report problem

Processing your request, Please wait....

0 favorites

Use this form to send a message to the ad author.

Use this form to send a message to the ad author.